HCC SPRING 2021 LATE AFTERNOON/EVENING CLASS SCHEDULE  
Class Nbr Subject Catalog Section Pat Begin Time End Time Start Date End Date Descr Building Room Min Units Instructor Name Class Note
AGRICULTURE                            
83868 AGR 245 35ZJ M 05:00 PM 06:00 PM 1/19/2021 5/9/2021 Pest Management WWW WWW 3 Winstead,Laura S. AGR 245 - Pest Management - Provides a study of agricultural pest control, including insects, diseases, and weeds, of common agricultural and horticultural crops. Management techniques will also be discussed, including chemical, biological, IPM, and organic methods.
This is an online synchronous hybrid class. Lectures will be via Collaborate within Blackboard. Class has a lecture and online component.
83867 AGR 245 35BY M 05:00 PM 06:00 PM 1/19/2021 5/9/2021 Pest Management A&S 203 3 Winstead,Laura S. AGR 245 - Pest Management - Provides a study of agricultural pest control, including insects, diseases, and weeds, of common agricultural and horticultural crops. Management techniques will also be discussed, including chemical, biological, IPM, and organic methods.
BUSINESS ADMINISTRATION                        
83876 BAS 270 35ZT M 06:00 PM 07:15 PM 3/15/2021 5/9/2021 Business Employability Seminar WWW WWW 1 Chappell,Carla Michelle BAS 270 Business Employability Seminar- Creates an error-free portfolio of business employment documents, using computer technology to assist with composition, proofreading, and formatting. Demonstrate proper interviewing skills through mock interviews. Course if offered on a Pass/Fail basis. (Prereq.: (CIT 105 Introduction to Computers, Sophomore Standing, and Business Administration Program Students only) or Consent of Instructor. This is a hybrid course. It includes both a face-to-face component and an Inter-net component. A significant part of the course learning is online and as a result, the amount of required classroom seat-time is reduced. Lecture: 1 credit (15 contact hours) Local Students Only. Students will meet through Microsoft TEAMS during the allotted time.
Local Students Only (Meet with TEAMS)
COMPUTER INFORMATION TECHNOLOGIES                    
83980 CIT 293 35ZT M 6:00 PM 7:15 PM 3/15/2021 5/9/2021 CIT Employability Studies WEB LOCAL WEB LOCAL 1 Chappell,Carla Michelle CIT 293 Employability Studies This is a hybrid course. It includes both a face-to-face component and an Inter-net component. A significant part of the course learning is online and as a result, the amount of required classroom seat-time is reduced. Should be sophmore standing and CIT Student only. Students will meet through Microsoft TEAMS during the allotted time.
ENGLISH                            
84526 ENG 101 35EP W 06:00 PM 07:15 PM 1/11/2021 5/9/2021 Writing I ADM 202 3 Tweddell,Patrick V ENG 101 Writing I-(Co-Requisite Model: Must have appropriate English Placement or completed IRW85) Focuses on academic writing. Provides instruction in drafting and revising essays that express ideas in Standard English, including reading critically, thinking logically, responding to texts, addressing specific audiences, researching and documenting sources. Includes review of grammar, mechanics and usage. Fulfills the writing requirement. This is a hybrid class. It includes both a face-to-face component and an Internet component. A significant part of the course learning is online and as a result, the amount of required classroom seat-time is reduced. Note: Must be taken with ENG 100-35EP class #84518.
84614 ENG 281 35H1 TU 03:30 PM 06:00 PM 1/11/2021 5/9/2021 Intro to Film STC 309 3 Fritts,David C ENG 281 Writing I-(Co-Requisite Model: Must have appropriate English Placement or completed IRW85) Focuses on academic writing. Provides instruction in drafting and revising essays that express ideas in Standard English, including reading critically, thinking logically, responding to texts, addressing specific audiences, researching and documenting sources. Includes review of grammar, mechanics and usage. Fulfills the writing requirement. This is a hybrid class. Must be taken with ENG 100-35ZP class #84525. This course is via the internet.
ENGLISH WITH WORKSHOPS                        
84527 ENG 101 35E1 W 06:00 PM 07:15 PM 1/11/2021 5/9/2021 Writing I ADM 202 3 Tweddell,Patrick V ENG 101 Writing I- Focuses on academic writing. Provides instruction in drafting and revising essays that express ideas in Standard English, including reading critically, thinking logically, responding to texts, addressing specific audiences, researching and documenting sources. Includes review of grammar, mechanics and usage. ACT in English 18 (or above) or equivalent placement level. First course in academic writing, with 102, fulfills the writing requirement for the AA and AS degrees.)
84518 ENG 100 35EP W 07:30 PM 08:20 PM 1/11/2021 5/9/2021 English Workshop ADM 202 2 Tweddell,Patrick V ENG 100 English Workshop- This course must be taken with ENG 101-35EP class #84526.
INTERDISCIPLINARY EARLY CHILDHOOD EDUCATION                  
84650 IEC 200 35EY W 06:00 PM 08:45 PM 1/11/2021 5/9/2021 Child Guidance A&S 202 3 Murray,Bridget L. IEC 200 Child Guidance- Requires 10 hours of fieldwork. (Prereq.: IEC 101 or 130 or permission of the program coordinator.) This is a hybrid course. It includes both face-to-face and internet components.
84652 IEC 210 35EY W 06:00 PM 08:45 PM 1/19/2021 5/9/2021 Family/Community Erly ChldhdEd A&S 202 3 Meyer,Jane IEC 210 Families and Communities in Early Childhood Education- Examines community programs that focus on forming partnerships with families to support child development and family well-being. Builds an awareness of family in context of a diverse society to create respect, build reciprocal relationships, and and empower families. Required ten (10) hours of field experience.
84653 IEC 216 35E1 T 06:00 PM 08:45 PM 1/11/2021 5/9/2021 Literacy and Language in IECE A&S 202 3 Meyer,Jane IEC 216 Literacy and Language in ECE-Requires 5 hours of fieldwork. (Prereq.: IEC 180 or permission of the program coordinator.) This is a hybrid course. It includes both face-to-face and internet components.
84690 IEC 235 35BE T 06:00 PM 08:30 PM 1/19/2021 5/9/2021 Intro to Inclusive Education A&S 202 3 Sizemore,Tracy IEC 235 Introduction to Inclusive Education- Presents the types of exceptional abilities that occur in the development of children with an emphasis on state state and federal laws that impact services. Introduces assessment, referral processes and sources, education plans, family service plans, center-based and home-based care, adaptions and assistive technology, and ethical considerations. This course requires ten (10) hours of field experience. Prereq.: IEC 180 or permission of IECE Coordinator.
INDUSTRIAL MAINTENANCE TECHNOLOGY                      
84260 IMT 151 35L2 M/W 04:15 PM 05:50 PM 1/19/2021 5/9/2021 Maintaining Indust Equip I Lab STC 110 2 Farber III,William Fred IMT 280 Advanced Programmable Logic Controllers Covers advanced theory programmable logic controllers to include designing applications, programming, interfacing and troubleshooting of industrial PLCs. Pre-requisite: ((IMT 220 and IMT221with a grade of C or greater) or (equivalent) or Consent of Instructor). Co-requisite: IMT 281 or Instructor consent. Lecture: 3 credits (45 contact hours).
84261 IMT 200 35BJ T/TH 04:15 PM 05:15 PM 1/19/2021 5/9/2021 Indust Robotics & Robot Maint STC 109 4 Farber III,William Fred IMT 200 Industrial Robotics and Robotic Maintenance Provides the industrial maintenance student an introduction to the theory of robots including applications, basic programming, components, industrial robotic safety standards, industrial robots classifications, key programming techniques, robotic motion concepts, and terminology. Instructs students on the concepts of preventive and predictive maintenance techniques required for a robot and their backup systems and recovery procedures. Provides the opportunity for the industrial maintenance student to develop, set up, and integrate work cells into manufacturing systems at a beginning level. Prerequisite: IMT 110 and IMT 111 or Consent of Instructor. Lecture/Lab: 4.0 credits (90 contact hours)
84261 IMT 200 35BJ T/TH 05:15 PM 06:45 PM 1/19/2021 5/9/2021 Indust Robotics & Robot Maint STC 108 4 Farber III,William Fred IMT 200 Industrial Robotics and Robotic Maintenance Provides the industrial maintenance student an introduction to the theory of robots including applications, basic programming, components, industrial robotic safety standards, industrial robots classifications, key programming techniques, robotic motion concepts, and terminology. Instructs students on the concepts of preventive and predictive maintenance techniques required for a robot and their backup systems and recovery procedures. Provides the opportunity for the industrial maintenance student to develop, set up, and integrate work cells into manufacturing systems at a beginning level. Prerequisite: IMT 110 and IMT 111 or Consent of Instructor. Lecture/Lab: 4.0 credits (90 contact hours)
84263 IMT 281 35L1 M/W 03:15 PM 04:50 PM 1/19/2021 5/9/2021 Adv Prog Logic Controllers Lab STC 108 2 Farber III,William Fred IMT 281 Programmable Logic Controllers Lab Provides practical applications of the theory in IMT 280 to include installation, programming, interfacing and troubleshooting of industrial PLCs. Pre-requisite: [(IMT 220 and 221) with a grade of C or greater) or Consent of Instructor. Co-requisite: IMT 280 or Consent of Instructor. Laboratory: 2 credits (60 contact hours). Components: Laboratory
MATHEMATICS                          
84136 MAT 150 35E1 M 06:00 PM 07:15 PM 1/11/2021 5/9/2021 College Algebra A&S 113 3 STAFF MAT 150 College Algebra Includes selected topics in algebra and analytic geometry. Develops manipulative skills and concepts required for further study in mathematics. Includes linear, quadratic, polynomial, rational, exponential, logarithmic and piecewise functions; systems of equations; and an introduction to analytic geometry. (Students may not receive credit for both MAT150 and any other College Algebra or Pre-calculus course. Credit not available on the basis of special exam.) Pre-requisite: 1. Math ACT score of 22 or above; 2. Math ACT score of 19 -21 with concurrent MAT 100 workshop; 3. Successful completion of MAT 061 with concurrent MAT 100 workshop; 4. Successful completion of MAT 071, MAT 085, MAT 126, or equivalent; or 5. KCTCS placement exam recommendation. Lecture: 3 credits (45 contact hours) MAT 150-35E1 and MAT 150-35P1 are the same class, the P1 section is paired with the MAT 100-35P1
MATHEMATICS WORKSHOP                        
84137 MAT 150 35EP M 06:00 PM 08:30 PM 1/11/2021 5/9/2021 College Algebra A&S 112 3 STAFF MAT 150 College Algebra Includes selected topics in algebra and analytic geometry. Develops manipulative skills and concepts required for further study in mathematics. Includes linear, quadratic, polynomial, rational, exponential, logarithmic and piecewise functions; systems of equations; and an introduction to analytic geometry. (Students may not receive credit for both MAT150 and any other College Algebra or Pre-calculus course. Credit not available on the basis of special exam.) Pre-requisite: 1. Math ACT score of 22 or above; 2. Math ACT score of 19 -21 with concurrent MAT 100 workshop; 3. Successful completion of MAT 061 with concurrent MAT 100 workshop; 4. Successful completion of MAT 071, MAT 085, MAT 126, or equivalent; or 5. KCTCS placement exam recommendation. Lecture: 3 credits (45 contact hours) Paired with MAT 100-35EP
84138 MAT 100 35EP W 06:00 PM 07:15 PM 1/11/2021 5/9/2021 College Algebra Workshop A&S 112 2 STAFF MAT 150 College Algebra Includes selected topics in algebra and analytic geometry. Develops manipulative skills and concepts required for further study in mathematics. Includes linear, quadratic, polynomial, rational, exponential, logarithmic and piecewise functions; systems of equations; and an introduction to analytic geometry. (Students may not receive credit for both MAT150 and any other College Algebra or Pre-calculus course. Credit not available on the basis of special exam.) Pre-requisite: 1. Math ACT score of 22 or above; 2. Math ACT score of 19 -21 with concurrent MAT 100 workshop; 3. Successful completion of MAT 061 with concurrent MAT 100 workshop; 4. Successful completion of MAT 071, MAT 085, MAT 126, or equivalent; or 5. KCTCS placement exam recommendation. Lecture: 3 credits (45 contact hours) MAT 150-35E1 and MAT 150-35P1 are the same class, the P1 section is paired with the MAT 100-35P1
MEDICAL ASSISITING                          
84155 MAI 230 3501 T 05:30 PM 08:30 PM 1/11/2021 5/9/2021 Medical Insurance STC 302 3 Girten,Staci M MAI 230 Introduces fundamentals of insurance processing and coding for the medical office, with focus on proper procedures for accurate coding systems using the ICD, CPT and HCPCS coding system. 
MEDICAL LABORATORY TECHNICIAN                      
84182 MLT 233 35BC MW 04:00 PM 06:00 PM 1/11/2021 3/7/2021 Clinical Chemistry I A/T 209 3 Bryant,Daphne C MLT 233 Clinical Chemistry I- PREREQ.: MLT 101 with a grade of ""C" or greater; permission by MLT program director/coordinator.
84187 MLT 234 35BT MW 03:00 PM 05:00 PM 3/15/2021 5/9/2021 Clinical Chemistry II A/T 209 2 Bryant,Daphne C MLT 234 Clinical Chemistry II- PREREQ: MLT 101 with a grade of ""C" or greater; permission by MLT program director/coordinator. Prereq.or Coreq: MLT 233. If taken as a prereq, a minimum grade of C.
WELDING TECHNOLOGY                          
84181 WLD 110 35BE M/W 05:00 PM 05:50 PM 1/19/2021 5/9/2021 Cutting Processes WLD 102 2 Morales,Gilbert J WLD 110 Cutting Processes A working knowledge of various cutting processes used by the welding industry. Will include, but is not limited to, safety, theory of operation, setup and operating techniques, troubleshooting and making minor equipment repairs, terms and definitions, identification, evaluation, repair and prevention of discontinuities of cut surfaces. Includes oxy-fuel cutting, plasma arc cutting, exothermic cutting, air carbon arc cutting, shielded metal arc cutting, and mechanical cutting process. Lecture: 2 credits (30 contact hours) Co-requisite: WLD 111 or Consent of Instructor
84183 WLD 111 35L2 M/W 05:50 PM 08:20 PM 1/19/2021 5/9/2021 Cutting Processes Lab WLD 110 3 Morales,Gilbert J WLD 111 Cutting Processes Lab Designed to provide the student with practical experience to become proficient in the use of various metal cutting processes. Safety, setup, and operating techniques are employed. Students will troubleshoot and make minor repairs to equipment. Students will also learn to identify, repair, and prevent reoccurrence of cut surface discontinuities. Processes shall include, but not limited to: OFC, PAC, AAC, and mechanical methods. Various materials will be used where appropriate. Lab: 3 credits (90 contact hours/30:1 ratio) Co-requisite: WLD 110 or Consent of Instructor.
84186 WLD 120 35BE M/W 05:00 PM 05:50 PM 1/19/2021 5/9/2021 Shielded Metal Arc Welding WLD 102 2 Morales,Gilbert J WLD 120 Shielded Metal Arc Welding Teaches students the identification, inspection, and maintenance of SMAW electrodes; principles of SMAW; the effects of variables on the SMAW process to weld plate and pipe; and metallurgy. Lecture: 2 credits (30 contact hours). Co-requisite: WLD 121 or Consent of Instructor
84189 WLD 121 35L2 M/W 05:50 PM 08:20 PM 1/19/2021 5/9/2021 Shield Metal ArcWld Fillet Lab WLD 110 3 Morales,Gilbert J WLD 121 Shielded Metal Arc Welding Fillet Lab Provides laboratory experiences in which the student acquires the manipulative skills to perform fillet welds in all positions. Lab: 3 credits (90 contact hours/30:1 ratio) Co-requisite: WLD 120 or Consent of Instructor
84192 WLD 130 35BE M/W 05:00 PM 05:50 PM 1/19/2021 5/9/2021 Gas Tungsten Arc Welding WLD 102 2 Morales,Gilbert J WLD 130 Gas Tungsten Arc Welding Identification, inspection, and maintenance of GTAW machines; identification, selection and storage of GTAW electrodes; principles of GTAW; the effects of variables on the GTAW process; and metallurgy. This course also teaches the theory and application of Plasma Arc Cutting. Co-requisite: WLD 131 or Consent of Instructor. Lecture: 2 credits (30 contact hours).
84195 WLD 131 35L2 M/W 05:50 PM 08:20 PM 1/19/2021 5/9/2021 Gas Tngstn Arc Weld Fillet Lab WLD 110 3 Morales,Gilbert J WLD 131 Gas Tungsten Arc Welding Fillet Lab Teaches the necessary manipulative skills needed to apply the Gas Tungsten Arc on various joint designs on plate with both ferrous and non-ferrous metals. Plasma Arc cutting included. Co-requisite: WLD 130 or Consent of Instructor. Laboratory: 3 credits (90 contact hours 30:1 ratio)
84198 WLD 140 35BE M/W 05:00 PM 05:50 PM 1/19/2021 5/9/2021 Gas Metal Arc Welding WLD 102 2 Morales,Gilbert J WLD 140 Gas Metal Arc Welding Identification, inspection, and maintenance of GMAW machines; identification, selection, and storage of GMAW electrodes; principles of GMAW; and the effects of variables on the GMAW process. Theory and applications of related processes such as FCAW and SAW and metallurgy are also included. Lecture: 2 credits (30 contact hours)
84201 WLD 141 35L2 M/W 05:50 PM 08:20 PM 1/19/2021 5/9/2021 Gas Metal Arc Weld Fillet Lab WLD 110 3 Morales,Gilbert J WLD 141 Gas Metal Arc Welding Fillet Lab Teaches the practical application and manipulative skills of Gas Metal Arc Welding and the proper safety situations needed in this process. Both ferrous and non-ferrous metals will be covered, as well as various joint designs on plate in all positions. Co-requisite: WLD 140 or Consent of Instructor. Laboratory: 3 credits (90 contact hours/30:1 ratio).
 
UPDATED: 2/1/2021