HCC SPRING 2020 LATE AFTERNOON/EVENING CLASS SCHEDULE
Class Number Subject Catalog Section Description Start Date End Date Pat Begin Time End Time Building Room Units Instructor Name Class Note
AGRICULTURE                    
86404 AGR  150 35BE Agricultural Power 1/21/2020 5/10/2020 W 06:00 PM 08:30 PM  A&S 203 3 STAFF AGR 150 Agricultural Power - Provides an introduction to farm equipmetn and their power units through classroom instruction that concentrates on specific principles that govern the equipment.  Includes a lab that applies the principles learned in the classroom.  Lecture: 1.0 credit (15 contact hours) Lab: 2.0 credits (45 contact hours)
86403 AGR  250 35BY Intro to Plants/Crop Productio 1/21/2020 5/10/2020 M 04:30 PM 07:00 PM  A&S 203 3 STAFF AGR 250-Introduction to Plants/Crop Production - Familiarizes students with the basic principles and theories involved in field crop production.  Provides a limited understanding of how crops are grown as a prelude to growing crops successfully.  Covers pest and pesticides as well as plan disease and protection.  Lecture: 2.0 credits (30 contact hours) Lab: 1.0 credit (45 contact hours)  This is a hybrid course. It includes both a face-to-face component and an Internet component. A significant part of the course learning is online and as a result, the amount of required classroom seat-time is reduced.  This is a hybrid course. It includes both a face-to-face component and an Internet component. A significant part of the course learning is online and as a result, the amount of required classroom seat-time is reduced
91281 AGR 250 35L1 Intro to Plants/Crop Productio 1/21/2020 5/10/2020 M TBA    A&S 203   Cherry, Audi AGR 250 - Lab
BIOLOGY                    
87239 BIO  112 35EY Introduction to Biology 1/13/2020 5/10/2020 T 06:00 PM 09:00 PM  STC 311 3 Cormier,Jason A. BIO 112 Introduction to Biology- Basic study of structure, function and interactions of living organisms including cell theory, genetics, energetics, evolution and ecology. Lecture: 3 credits. This is a hybrid course. It includes both a face-to-face component and an Internet component. A significant part of the course learning is online and as a result, the amount of required classroom seat-time is reduced.
Class will meet on the following dates:
1-14-19
1-28-19
2-11-19
2-25-19
3-17-19
3-31-19
4-14-19
4-28-19
BUSINESS ADMINISTRATION                    
86336 BAS  270 35YT Business Employability Seminar 3/16/2020 5/10/2020 TU 06:00 PM 07:15 PM  A&S 228 1 Chappell,Carla Michelle BAS 270 Business Employability Seminar- Creates an error-free portfolio of business employment documents, using computer technology to assist with composition, proofreading, and formatting.  Demonstrate proper interviewing skills through mock interviews.  Course if offered on a Pass/Fail basis. (Prereq.: (CIT 105  Introduction to Computers, Sophomore Standing, and Business Administration Program Students only) or Consent of Instructor. This is a hybrid course. It includes both a face-to-face component and an Inter-net component. A significant part of the course learning is online and as a result, the amount of required classroom seat-time is reduced. Lecture: 1 credit (15 contact hours)
COMPUTER INFORMATION TECHNOLOGY                    
86338 CIT  293 35YT CIT Employability Studies 3/16/2020 5/10/2020 TU 06:00 PM 07:15 PM  A&S 228 1 Chappell,Carla Michelle CIT 293 Employability Studies -Creates an error-free portfolio of employment documents, using computer technology to assist with composistion, proofreading, and formatting.  Demonstrate proper interviewing skills through mock interviews.  Complete a Career Path Employability Assessment. Pre-requisite:  If yes, list: (Sophomore Standing, and CIT Program Students only) or Consent of Instructor)This is a hybrid course. It includes both a face-to-face component and an Inter-net component. A significant part of the course learning is online and as a result, the amount of required classroom seat-time is reduced. Lecture: 1 credit (15 contact hours)
 ENGLISH                            
86708 ENG  101 35EP Writing I 1/13/2020 5/10/2020 W 06:00 PM 0715 PM  ADM 202 3 STAFF ENG 101 Writing I- (Co-Requisite Model: Must have appropriate English Placement or completed IRW85). Fulfills the writing requirement. This is a hybrid course. It includes both a face-to-face component and an Internet component. A significant part of the course learning is online and as a result, the amount of required classroom seat-time is reduced. Note: Must be taken with ENG 100-35EP.
86703 ENG  100 35EP English Workshop 1/13/2020 5/10/2020 W 07:30 PM 08:20 PM  ADM 202 2 STAFF ENG 100 English Workshop- Must be taken with ENG 101-35EP.
86710 ENG  101 35E1 Writing I 1/13/2020 5/10/2020 W 06:00 PM 07:15 PM  ADM 202 3 STAFF ENG 101 Writing I- ACT in English 18 (or above) or equivalent placement level. First course in academic writing, with 102, fulfills the writing requirement for the AA and AS degrees.) This is a hybrid course. It includes both a face-to-face component and an Internet component. A significant part of the course learning is online and as a result, the amount of required classroom seat-time is reduced.
INDUSTRIAL MAINTENANCE TECHNOLOGY                  
86842 IMT  100 35BE Welding for Maintenance 1/21/2020 5/10/2020 M/W 06:00 PM 06:50 PM  WLD 102 3 Morales,Gilbert J IMT 100  Provides basic instruction needed for student to weld using SMAW (Stick), GMAW (MIG), GTAW (TIG), andOxy-Fuel processes. Co-requisite: (IMT 101 or (IMT 1011 - IMT 1014)) or Consent of Instructor
86843 IMT  101 35L1 Welding for Maintenance Lab 1/21/2020 5/10/2020 M/W 06:50 PM 09:30 PM  WLD 110 2 Morales,Gilbert J IMT 101 Welding for Maintenance Lab Provides application of basic welding skills used in SMAW (Stick), GMAW (MIG), GTAW (TIG) and Oxy-Fuel. Corequisite:  IMT 100 or consent.  Laboratory: 2 credits (60 contact hours)
86689 IMT  200 35BJ Indust Robotics & Robot Maint 1/21/2020 5/10/2020 M/W 04:15 PM 05:15 PM  STC 109 4 Farber III,William Fred IMT 200 Industrial Robotics and Robotic Maintenance Provides the industrial maintenance student an introduction to the theory of robots including applications, basic programming, components, industrial robotic safety standards, industrial robots classifications, key programming techniques, robotic motion concepts, and terminology. Instructs students on the concepts of preventive and predictive maintenance techniques required for a robot and their backup systems and recovery procedures. Provides the opportunity for the industrial maintenance student to develop, set up, and integrate work cells into manufacturing systems at a beginning level. Prerequisite: IMT 110 and IMT 111 or Consent of Instructor. Lecture/Lab: 4.0 credits (90 contact hours)
86689 IMT  200 35BJ Indust Robotics & Robot Maint 1/21/2020 5/10/2020 M/W 05:15 PM 06:30 PM  STC 108   Farber III,William Fred  
86695 IMT  281 35L1 Program Logic Controllers Lab 1/21/2020 5/10/2020 T/TH 05:15 PM 06:30 PM  STC 108 2 Owens, Randall Lee IMT 281 Programmable Logic Controllers Lab Provides practical applications of the theory in IMT 280 to include installation, programming, interfacing and troubleshooting of industrial PLCs. Pre-requisite: [(IMT 220 and 221) with a grade of C or greater) or Consent of Instructor. Co-requisite: IMT 280 or Consent of Instructor. Laboratory: 2 credits (60 contact hours). Components: Laboratory
INTERDISCIPLINARY EARLY CHILDHOOD EDUCATION                  
87285 IEC  102 35E1 Foundations/Early Childhood Ed 1/13/2020 5/10/2020 M 06:00 PM 08:45 PM  A&S 202 3 Murray,Bridget L. IEC 102 Foundations of Early Childhood Education- Requires 10 hours of fieldwork.
87294 IEC  170 35BY Observation and Assessment 1/21/2020 5/10/2020 T 06:00 PM 08:45 PM  A&S 202 3 STAFF IEC 170 Observation and Assessment-Requires 10 hour of fieldwork. (Prereq: IEC 101 or 102 or 130 or permisson of the program coordinator.) This a hybrid course. It includes both face-to-face and internet components. The course meets every other Tuesday beginning 1/21.
87301 IEC  200 35BY Child Guidance 1/21/2020 5/10/2020 W 06:00 PM 08:45 PM  A&S 202 3 Murray,Bridget L. IEC 200 Child Guidance- Requires 10 hours of fieldwork. (Prereq: IEC 101 or 130 or permission of the program coordinator.) This is a hybrid course. It includes both face-to-face and internet componets. The course meets every other Wednesday beginnning 1/22/20.
87428 IEC  216 35EY Literacy and Language in IECE 1/13/2020 5/10/2020 W 06:00 PM 08:45 PM  A&S 202 3 Meyer,Jane E. IEC 216 Literacy and Language in ECE- Requires 5 hours of fieldwork. (Prereq: IEC 180 or permission of the program coordinator.)  This is a hybrid course.  It includes both face-to-face and internet componets.  The course meets every other Wednesday beginnning 1/15/20.
87456 IEC  235 35EY Intro to Inclusive Education 1/13/2020 5/10/2020 T 06:00 PM 08:45 PM  A&S 202 3 Conley,Erica Caitlin IEC 235 Introduction to Inclusive Education- Requires 10 hours of fieldwork. (Pre-req. IEC 180 or permission of the program coordinator.) It includes both face-to-face and internet components. This course meets every other Tuesday beginning 1/14/20.
MATHEMATICS                          
86131 MAT   61 35EY Foundations of College Algebra 1/13/2020 5/10/2020 M 06:00 PM 08:30 PM  A&S 112 4 Merrill, Connie MAT 061 Foundations of College Algebra Prepares students to take College Algebra with College Algebra Workshop. Introduces operations on integers, decimals, and fractions; ratios, proportions, and percents; simplifying radicals and algebraic expressions; solving linear and quadratic equations; linear inequalities; solving formulas; factoring; slope and graphing lines. Pre-requisite: KCTCS Placement Policy.  Lecture: 4 credits (60 contact hours)
This is a hybrid course. It includes both a face-to-face component and an Internet component. A significant part of the course learning is online and as a result, the amount of required classroom seat-time is reduced.
86608 MAT  150 35EP College Algebra 1/13/2020 5/10/2020 M 06:00 PM 08:30 PM  A&S 113 3 Leach, Gregory MAT 150 College Algebra Includes selected topics in algebra and analytic geometry. Develops manipulative skills and concepts required for further study in mathematics. Includes linear, quadratic, polynomial, rational, exponential, logarithmic and piecewise functions; systems of equations; and an introduction to analytic geometry. (Students may not receive credit for both MAT150 and any other College Algebra or Pre-calculus course. Credit not available on the basis of special exam.) Pre-requisite: 1. Math ACT score of 22 or above; 2. Math ACT score of 19 -21 with concurrent MAT 100 workshop; 3. Successful completion of MAT 061 with concurrent MAT 100 workshop; 4. Successful completion of MAT 071, MAT 085, MAT 126, or equivalent; or 5. KCTCS placement exam recommendation.  Lecture: 3 credits (45 contact hours)
86610 MAT  100 35EP College Algebra Workshop 1/13/2020 5/10/2020 W 06:00 PM 07:40 PM  A&S 113 4 Leach, Gregory MAT 100  College Algebra Workshop Provides parallel and supplemental review of algebra skills needed for success in college algebra for students with a Math ACT of 19-21. (Credit not available by special exam; withdrawal from MAT 100 requires withdrawal from MAT 150; can be offered pass/fail or letter grade basis.) Lecture:  2.0 credits (30 contact hours).  Pre-requisite:  Concurrent enrollment in MAT 150.  NOTE:  Effective Fall 2010 ACT 19.
86605 MAT  150 35E1 College Algebra 1/13/2020 5/10/2020 M 06:00 PM 08:30 PM  A&S 113 3 Leach, Gregory MAT 150 College Algebra Includes selected topics in algebra and analytic geometry. Develops manipulative skills and concepts required for further study in mathematics. Includes linear, quadratic, polynomial, rational, exponential, logarithmic and piecewise functions; systems of equations; and an introduction to analytic geometry. (Students may not receive credit for both MAT150 and any other College Algebra or Pre-calculus course. Credit not available on the basis of special exam.) Pre-requisite: 1. Math ACT score of 22 or above; 2. Math ACT score of 19 -21 with concurrent MAT 100 workshop; 3. Successful completion of MAT 061 with concurrent MAT 100 workshop; 4. Successful completion of MAT 071, MAT 085, MAT 126, or equivalent; or 5. KCTCS placement exam recommendation.  Lecture: 3 credits (45 contact hours)
MEDICAL ASSISTING                          
87310 MAI  230 3501 Medical Insurance 1/13/2020 5/10/2020 T 05:30 PM 08:30 PM  STC 302 3 Girten,Staci M MAI 230: Medical Insurance. Introduces fundamentals of insurance processing and coding for the medical office , with focus on proper procedures for accurate coding systems.
87306 MAI  220 35L1 Med Assisting Lab Technique II 1/13/2020 5/10/2020 TH 04:30 PM 06:30 PM  A/T 209 3 Willis,Kendra Kaye  
NURSING ASSISTANT                          
87448 NAA  100 3586 Nursing Assistant Skills I 1/13/2020 5/10/2020 M 04:00 PM 08:30 PM     3 House,Bobbie J. NAA 100 Prior knowledge and skills for nurse aides to assume the role and responsibility in a long-term care setting.  No pre-requisites required.
PSYCHOLOGY                             
87542 PSY  110 35YE General Psychology 1/13/2020 5/10/2020 TH 06:00 PM 07:20 PM  ADM 209 3 Burzynski,Peter R. PSY 110 General Psychology- Preque: Current placement scores for college level reading established by KCTCS for completion of, or concurrent enrollment in, transitional reading course(s). Fulfills Social Behavioral Science general ed. requirements. This is a hybrid class with significant online content.
87541 PSY  110 35EP General Psychology 1/13/2020 5/10/2020 TH 06:00 PM 07:20 PM  ADM 209 3 Burzynski,Peter R. PSY 110 General Psychology- Preque: Current placement scores for college level reading established by KCTCS for completion of, or concurrent enrollment in, transitional reading course(s). Fulfills Social Behavioral Science general ed. requirement. This is a hybrid class with significant online content. Class must be taken with RDG 100-35EP.
87525 RDG  100 35EP Reading Workshop 1/13/2020 5/10/2020 TH 06:00 PM 07:20 PM  ADM 208 2 Boyd,Kelly Jo RDG 100 Reading Workshop- Prereq: KCTCS Placement Policy. Class must be taken with PSY 110-35EP
RELIGION                            
87628 REL  101 35EJ Intro to Religious Studies 1/21/2020 5/10/2020 T 06:00 PM 08:45 PM  A&S 111 3 Winstead,Laura S. REL 101 Introduction to Religious Studies- Introduces students to the study of religion, emphasizing the varieties, differences, and similarities of religious experience and expression. Examines the interaction between religious experience and expression and social and cultural contexts through study of selected examples. This is a hybrid course. It includes both face-to-face and online class work. This class meets every other Tuesday on the following dates: 1/21, 2/4, 2/18, 3/3, 3/24, 4/7. 4/21, 5/5.
WELDING TECHNOLOGY                          
86842 IMT  100 35BE Welding for Maintenance 1/21/2020 5/10/2020 M/W 06:00 PM 06:50 PM  WLD 102 3 Morales,Gilbert J IMT 100  Provides basic instruction needed for student to weld using SMAW (Stick), GMAW (MIG), GTAW (TIG), andOxy-Fuel processes. Co-requisite: (IMT 101 or (IMT 1011 - IMT 1014)) or Consent of Instructor
86843 IMT  101 35L1 Welding for Maintenance Lab 1/21/2020 5/10/2020 M/W 06:50 PM 09:30 PM  WLD 110 2 Morales,Gilbert J IMT 101 Welding for Maintenance Lab Provides application of basic welding skills used in SMAW (Stick), GMAW (MIG), GTAW (TIG) and Oxy-Fuel. Corequisite:  IMT 100 or consent.  Laboratory: 2 credits (60 contact hours)
86833 WLD  110 35BE Cutting Processes 1/21/2020 5/10/2020 M/W 06:00 PM 06:50 PM  WLD 102 2 Morales,Gilbert J WLD 110 Cutting Processes A working knowledge of various cutting processes used by the welding industry. Will include, but is not limited to, safety, theory of operation, setup and operating techniques, troubleshooting and making minor equipment repairs, terms and definitions, identification, evaluation, repair and prevention of discontinuities of cut surfaces. Includes oxy-fuel cutting, plasma arc cutting, exothermic cutting, air carbon arc cutting, shielded metal arc cutting, and mechanical cutting process. Lecture: 2 credits (30 contact hours) Co-requisite: WLD 111 or Consent of Instructor
86834 WLD  111 35L1 Cutting Processes Lab 1/21/2020 5/10/2020 M/W 06:50 PM 09:30 PM  WLD 110 3 Morales,Gilbert J WLD 111 Cutting Processes Lab Designed to provide the student with practical experience to become proficient in the use of various metal cutting processes. Safety, setup, and operating techniques are employed.  Students will troubleshoot and make minor repairs to equipment. Students will also learn to identify, repair, and prevent reoccurrence of cut surface discontinuities. Processes shall include, but not limited to: OFC, PAC, AAC, and mechanical methods. Various materials will be used where appropriate. Lab: 3 credits (90 contact hours/30:1 ratio) Co-requisite: WLD 110 or Consent of Instructor.
86835 WLD  120 35BE Shielded Metal Arc Welding 1/21/2020 5/10/2020 M/W 06:00 PM 06:50 PM  WLD 102 3 Morales,Gilbert J WLD 120 Shielded Metal Arc Welding Teaches students the identification, inspection, and maintenance of SMAW electrodes; principles of SMAW; the effects of variables on the SMAW process to weld plate and pipe; and metallurgy. Lecture: 2 credits (30 contact hours).  Co-requisite:  WLD 121 or Consent of Instructor
86836 WLD  121 35L2 Shield Metal ArcWld Fillet Lab 1/21/2020 5/10/2020 M/W 06:50 PM 09:30 PM  WLD 110 3 Morales,Gilbert J WLD 121 Shielded Metal Arc Welding Fillet Lab Provides laboratory experiences in which the student acquires the manipulative skills to perform fillet welds in all positions. Lab: 3 credits (90 contact hours/30:1 ratio) Co-requisite: WLD 120 or Consent of Instructor
86837 WLD  130 35BE Gas Tungsten Arc Welding 1/21/2020 5/10/2020 M/W 06:00 PM 06:50 PM  WLD 102 2 Morales,Gilbert J WLD 130 Gas Tungsten Arc Welding Identification, inspection, and maintenance of GTAW machines; identification, selection and storage of GTAW electrodes; principles of GTAW; the effects of variables on the GTAW process; and metallurgy. This course also teaches the theory and application of Plasma Arc Cutting. Co-requisite: WLD 131 or Consent of Instructor. Lecture: 2 credits (30 contact hours).
86838 WLD  131 35L2 Gas Tngstn Arc Weld Fillet Lab 1/21/2020 5/10/2020 M/W 06:50 PM 09:30 PM  WLD 110 3 Morales,Gilbert J WLD 131 Gas Tungsten Arc Welding Fillet Lab Teaches the necessary manipulative skills needed to apply the Gas Tungsten Arc on various joint designs on plate with both ferrous and non-ferrous metals. Plasma Arc cutting included. Co-requisite: WLD 130 or Consent of Instructor. Laboratory: 3 credits (90 contact hours 30:1 ratio)
86839 WLD  140 35BE Gas Metal Arc Welding 1/21/2020 5/10/2020 M/W 06:00 PM 06:50 PM     2 Morales,Gilbert J WLD 140  Gas Metal Arc Welding Identification, inspection, and maintenance of GMAW machines; identification, selection, and storage of GMAW electrodes; principles of GMAW; and the effects of variables on the GMAW process. Theory and applications of related processes such as FCAW and SAW and metallurgy are also included.  Lecture: 2 credits (30 contact hours)
86840 WLD  141 35L2 Gas Metal Arc Weld Fillet Lab 1/21/2020 5/10/2020 M/W 06:50 PM 09:30 PM  WLD 110 3 Morales,Gilbert J WLD 141 Gas Metal Arc Welding Fillet Lab Teaches the practical application and manipulative skills of Gas Metal Arc Welding and the proper safety situations needed in this process. Both ferrous and non-ferrous metals will be covered, as well as various joint designs on plate in all positions. Co-requisite: WLD 140 or Consent of Instructor. Laboratory: 3 credits (90 contact hours/30:1 ratio).
86841 WLD  227 35L1 Shield Metal ArcWld Pipe Lab A 1/21/2020 5/10/2020 M/W 06:00 PM 08:40 PM  WLD 110 3 Morales,Gilbert J WLD 227 Shielded Metal Arc Welding Pipe Lab A Teaches the required manipulative skills to arc weld pipe using mild steel electrodes in the 2G and 5G positions including proper pipe preparations, electrodes, safety precautions, and welding sequences. Fillet welds on pipe joints are also included in 2F, 2FR, 4F, and 5F positions. Lab: 3 credits (90 contact hours/30:1 ratio).  Pre-requisite: WLD 225 or Consent of Instructor.
UPDATED: 1/27/2020